Double-sided 2-up Printing on a Single-sided Printer
If you want to print a booklet from Word X or Word 2004, it can be done without an expensive printer. This article explains how to do it, step-by-step. But there are three caveats.
Jul 28, 2016 Quick AV to show how to set up a A5 Booklet Template to be used to present information on SEQTA LEARN. Create a new blank document in Word. Click 'File,' then select 'Page Setup.' In the Page Setup dialogue box, set the paper size to match the size of the paper with which you intend to print your booklet.
Caveats
1. These instructions are for an A5 booklet on an A4 printer that delivers face down after printing on the top face of the sheets fed from the input tray. That is, if you are printing portrait A4, the first page is at the bottom of the heap with its top edge first out of the machine. This, fortunately, is the most common set-up on mid-price printers.
2. This has been tested with OS X 10.3.x. You need its vastly improved Preview program and new print options. Realflight g5 dongle emulator 3.4 rar.
3. These instructions work for 'perfect' binding, where each sheet is separate. Folded or stitched binding is another whole kettle of fish, for which you will need a proper imposition program. I have never seen a free one.
Note: If your printer does not feed as described, it is not impossible to adapt this recipe with a little experimentation. Use tricks like marking the paper in the input tray with penciled arrows and sheet numbers on each pass.
Preparation (optional, but recommended)
Create a custom template with even and odd headers, mirrored margins and a small gutter (extra space on the inside to accommodate the binding wires, glue or whatever). Then base your document on the template.
Make sure your document will print as a single file. Test with print to PDF. Some section breaks will split the output into separate files. You are dead in the water if that happens.
Numbered pages are very useful, especially if you drop the paper stack half way through. Torch browser for mac.
Production Steps
1. Print from Word with these settings from the print dialog panel.
- Paper handling — Even pages only
- Output options — Print to file — Postscript (call the file something like 'booklet evens')
2. Print again from Word with these settings.
- Paper handling — Odd pages only
- Output options — Print to file — Postscript (call the file something like 'booklet odds')
How To Print A Booklet In Word For Mac
3. Forget Word now. Open 'booklet evens.ps' in Preview.
4. Print from Preview with these settings from the print dialog panel.
How Do I Print A Booklet In Word For Mac 2016 Books
- Layout — 2 pages per sheet, print order 2-1
- Paper handling — 'Reverse page order' checked
5. Take the paper off the output tray, and without any turning, flipping or shuffling, put it all back in the input tray.
6. Open 'booklet odds.ps' in Preview.
7. Print from Preview with these settings.
How To Print A Booklet In Word On Mac
- Layout — 2 pages per sheet, print order 1-2
- Paper handling — 'Reverse page order' unchecked
8. Guillotine the A4 to make two heaps of A5.
9. Merge the two heaps page by page, turning one over from each pair.
10. Bind and trim.
Notes
This sequence — printing the evens in reverse before printing the odds forward — seems to free you from worry about the number of pages being divisible by four and saves shuffling the paper between the two printing passes.
Printing as postscript in print from Word stops it trying to outsmart you, and as a bonus, works around the 'mis-feature' that prints your EPS logo art from the preview bitmap when you want it to print from the high resolution graphic file.
It helps to have a meaty guillotine (a.k.a paper cutter). I have done 400 page books with this recipe, and chopping through 100 sheets in a single pass is most satisfying. Knowing that you have saved 300 sheets of A4 and produced something that is a pleasure to hold is pure bonus.
It is worthwhile getting your styles ready for the reduction in size. Your readers expect smaller type on a smaller page, but don't strain their eyes. I use 14pt Adobe Garamond on 16pt leading (the space between lines of text) for my body style. The resulting 7pt font on 8pt leading looks okay on A5 for technical manuals. You might choose to go a little larger for a novel, or if there are footnotes you actually expect to be read.
Don't forget your major section boundaries should start on odd pages, and that odd pages are always on the right of each spread. Word handles blank pages at the end of chapters well. Managing your odd and even running heads with the section specification is probably the subject of another note.
Alternatives
There are freeware and shareware applications available that can be helpful for booklet printing as well. Example:
Cheap Impostor: Shareware; speedy; a new version – as of May 2007 – allows for 'creep' (pages near the outside have their outer margins too far from the edge of the paper); comes in both US and A4 versions. The newest version even
compensates for the printer margins being slightly out of spec. A neat feature of Cheap Impostor is that it will prepare 'signatures' for longer publications. Signatures are individually folded subsections that are later stacked and bound. The manual includes some binding hints.
Printing booklets is a common task that many users want to accomplish. The best way to create a booklet depends on the version of Word you are using. Fortunately, Word includes built-in capabilities to print booklets. Follow these steps to set up your document as a booklet:
- Display the Page Layout (Layout in Word 2016 or later versions) tab of the ribbon.
- Click the small icon at the bottom-right corner of the Page Setup group. Word displays the Page Setup dialog box.
- Make sure the Margins tab is displayed. (See Figure 1.)
- Using the Multiple Pages drop-down list, choose Book Fold. Word changes the page orientation to landscape, if necessary.
- In the Margins area of the dialog box, make sure the margins are set appropriately for your document.
- Click OK. The text in your document is reformatted to fit within the page layout you just specified.
Figure 1. The Margins tab of the Page Setup dialog box.
When you print your document, you should choose to print two-sided if you have a printer that will automatically duplex. If not, you should choose the Manual Duplex check box in the Print dialog box, and then feed the pages through the printer twice.
If you prefer, you can also use a third-party program that produces booklets. A few programs suggested by WordTips readers include the following:
- ClickBook (http://www.bluesquirrel.com)
- FinePrint (http://www.fineprint.com)
Another alternative would be to save you document as a PDF and print the booklet from the PDF program. You may also be able to print booklets by using the capabilities of your printer. Some printers will handle booklet printing automatically. Refer to your printer manual or do some searching through the printer driver settings to find more information.
